CSCA Chemistry Amount-of-Substance Calculations: Linking the Four Formulas n, m, V and c

This article covers amount-of-substance calculations in CSCA Chemistry, linking n=m/M, n=V/Vm, c=n/V and the rule that solute amount stays the same on dilution into one chain. It first lists how many past-paper questions each of the four points has, then walks through full solution steps with origin

CSCA·PRO編集部2026年11月8日 · 8分で読めます
CSCA·PRO

This article is about amount-of-substance calculations in CSCA Chemistry. You need to use four formulas together: n=m/M, n=V/Vm, c=n/V, and the fact that the amount of solute does not change on dilution. The CSCA Chemistry paper is 60 minutes, 48 single-choice questions, full marks 100, with a Chinese or English paper available, ultimately subject to the requirements of the institution you apply to; calculators are not allowed, which leaves an average of 75 seconds per question. If the formulas are not solid and you keep converting units, the time disappears quickly.

Why is it worth learning? Amount of substance is the entry point to chemical calculations. Mass, gas volume, solution concentration and the mole ratios in chemical equations all have to be converted into n first. Once you can link these four formulas smoothly, reaction calculations later on will go much more easily.

How Much This Is Tested: 15 Questions Across the Four Knowledge Points

First, the question counts. The four knowledge points below all come from the chapter on amount of substance, and the figures are from 4 past papers with 185 questions in total:

  • Amount of substance, molar mass and number of particles: 1 question, appearing in 1 of the 4 papers
  • Molar volume of gases and Avogadro's law: 2 questions, appearing in 2 of the 4 papers
  • Amount-of-substance concentration, dilution and mixing: 5 questions, appearing in 3 of the 4 papers
  • Stoichiometry, excess and purity calculations: 7 questions, appearing in all 4 papers; among these, 6 are conversions by mole ratio and 1 is identifying the limiting reagent

Add the four knowledge points directly: 1+2+5+7=15 questions. This only adds up these four knowledge points and does not extrapolate to other sections. The count reflects past papers only and is not an official promise about what will be set.

Looking at the sub-items, the 6 questions on conversion by mole ratio are the most frequent sub-item in this group. So do not just memorise formulas; you also need to be able to apply the formulas after a chemical equation. For the distribution of topic areas across chemistry as a whole, see What CSCA Chemistry Tests: 9 Topic Areas Across 185 Questions in 4 Past Papers.

How the Four Formulas Link: The Main Line of Amount-of-Substance Calculations in CSCA Chemistry

1. n=m/M: converting mass into amount of substance

M is the molar mass, in g·mol⁻¹; the unit of n is mol. Chinese textbooks write the unit of molar mass as g·mol⁻¹, while some English textbooks write g/mol — the meaning is the same.

If the question gives relative atomic masses, use the values given in the question and do not mix different approximations within the same question. For example, if the question gives H=1 and O=16, then M(H₂O)=18 g·mol⁻¹.

For the number of particles, use N=n×N_A. Chinese textbooks write the Avogadro constant as N_A, take it as 6.02×10²³ mol⁻¹, and write the counter word 个 after the value.

2. n=V/Vm: converting gas volume into amount of substance

Standard conditions are 0 °C and 101.325 kPa, with Vm=22.4 L·mol⁻¹. This formula applies to gases only. If the question does not say standard conditions, do not plug in 22.4 straight away.

Chinese textbooks use this value; some English textbooks take STP as 100 kPa and write 22.7 L·mol⁻¹. When reading an English-language question, check the conditions and constants given in the question first.

Avogadro's law says: gases at the same temperature, the same pressure and the same volume contain the same number of molecules. But the number of atoms is not necessarily the same. For example, CO₂ and O₂ with the same number of molecules have different numbers of atoms.

3. c=n/V: the concentration formula

c is the amount-of-substance concentration, in mol·L⁻¹; mol/L is also accepted. V is the volume of the solution, not the volume of the solvent, and it must be in L. If the question gives mL, divide by 1000 first.

4. Dilution: c₁V₁ = c₂V₂

The amount of solute does not change on dilution, so c₁V₁ = c₂V₂. Here V₁ and V₂ are both solution volumes. To find the concentration after dilution, first calculate the amount of solute, then divide by the final solution volume.

The order for the four formulas is: first find n from m or from the gas V, then find c from n; when a reaction is involved, write the equation first, convert the known n into the unknown n using the mole ratio, then go back to m, V or c.

Original Practice Examples: Walking Through the Formulas

The four below are all original practice examples with simple numbers, so no calculator is needed.

Original Example 1 (n=m/M and number of particles): What is the amount of substance of 9 g of water (H₂O)? How many water molecules does it contain? The question gives H=1, O=16.

Solution: M(H₂O)=1×2+16=18 g·mol⁻¹. n=9÷18=0.5 mol. N=0.5×6.02×10²³=3.01×10²³ particles. Answer: 0.5 mol, containing 3.01×10²³ water molecules.

Original Example 2 (n=V/Vm and c=n/V): Under standard conditions, 2.24 L of HCl gas is completely dissolved in water and made up to 100 mL of solution. Find the amount of substance of the solute and the amount-of-substance concentration of the solution.

Solution: n(HCl)=2.24÷22.4=0.1 mol. V=100 mL=0.100 L. c=0.1÷0.100=1 mol·L⁻¹. Answer: 0.1 mol of solute, concentration 1 mol·L⁻¹.

Original Example 3 (dilution): Take 20 mL of 1 mol·L⁻¹ NaCl solution and dilute it with water to 100 mL. Find the amount-of-substance concentration of NaCl after dilution.

Solution: before dilution, n=1×0.020=0.020 mol. The solute does not change on dilution, and after dilution V=0.100 L. c=0.020÷0.100=0.2 mol·L⁻¹. You can also use c₁V₁=c₂V₂: 1×20=c₂×100, c₂=0.2 mol·L⁻¹. Answer: 0.2 mol·L⁻¹.

Original Example 4 (mole ratio): 2H₂ + O₂ → 2H₂O. Under standard conditions, 4.48 L of H₂ reacts completely. How many litres of O₂ are needed? How many grams of H₂O are produced? The question gives H=1, O=16.

Solution: n(H₂)=4.48÷22.4=0.2 mol. The coefficient ratio H₂∶O₂=2∶1, so n(O₂)=0.2÷2=0.1 mol and V(O₂)=0.1×22.4=2.24 L. The coefficient ratio H₂∶H₂O=2∶2=1∶1, so n(H₂O)=0.2 mol and m(H₂O)=0.2×18=3.6 g. Answer: 2.24 L of O₂ is needed and 3.6 g of H₂O is produced.

Common Mistakes: Check the Conditions Before Plugging Into the Formula

  • Do not use 22.4 carelessly: first check whether it is standard conditions, then check whether the substance is a gas. If it is not standard conditions, work with the conditions given in the question.
  • V is the solution volume: the V in c=n/V is not the volume of water. If the question gives mL, convert to L first.
  • For dilution, look at "diluted to": V₂ in c₁V₁=c₂V₂ is the final solution volume after dilution, not the volume of water added.
  • Do not mix relative atomic masses: use whatever the question gives. Do not use 24 in one place and 24.3 in another within the same question.
  • Distinguish molecules from atoms: 1 mol of CO₂ contains 1 mol of CO₂ molecules, 1 mol of C atoms and 2 mol of O atoms, so the total amount of atoms is 3 mol. When the question asks for a "number", multiply by N_A.
  • Mole ratios come from coefficients: do not treat a mass ratio as a mole ratio. When identifying the limiting reagent, divide the n of each reactant by its own coefficient — the smallest ratio is used up first.

Revision Advice (Study Suggestions, Not Official Rules)

The following are study suggestions, not official rules; you can adjust them to your own schedule:

  1. Practise units first: convert quickly between g, mol, L and mL, especially mL to L.
  2. Practise the four formulas separately: n=m/M, n=V/Vm, c=n/V, c₁V₁=c₂V₂. Do a few simple questions for each formula first, and write out the units.
  3. Then practise linking them: m→n→c; gas V→n→c; c₁V₁→c₂V₂. Do only one conversion per step and keep your rough work clear.
  4. Finally practise mole ratios: balance the equation first, then calculate the n of the known substance, use the coefficient ratio to find the n of the unknown, and end by going back to the mass, gas volume or concentration the question asks for.
  5. Do not use a calculator in everyday practice: practise mental arithmetic with simple numbers. The exam allows an average of 75 seconds per question, so only solid formulas and fast unit work leave you time to read the question.

Next Steps

Start with the 15-minute diagnostic to see whether you get stuck at "mass to n", "gas to n", "concentration" or "mole ratio"; then go to the Chemistry learning center to study and practise by knowledge point.

Further Reading

最終確認日:2026年11月8日。CSCA·PROは独立した受験対策プラットフォームであり、公式のCSCA試験およびその主催者とは関係ありません。試験の日程などは公式の発表に従ってください。

解答に一番時間がかかる問題形式を知りたいですか?15分のレベル診断。提出するとすぐにレポートが出ます。
無料レベル診断
あなたの場合はどうなる?聞いてくださいCSCA·PRO チームが返信します