Common Forces in CSCA Physics: Elastic Force, Gravity and Friction in 16 Real Questions

In CSCA Physics, "common forces" accounts for 16 questions across 4 real papers: 5 on elastic force and Hooke's law, 5 on gravity, and 6 on static and sliding friction. This article explains G=mg, f=μN and how to find static friction from the state of motion, with three original worked examples and

CSCA·PRO 编辑部2026 年 11 月 8 日 · 8 分钟阅读
CSCA·PRO

How much this section is worth: 16 questions, appearing in all 4 papers

CSCA Physics is 60 minutes and 48 single-choice questions, and mechanics is the largest of the five modules. At the start of mechanics, "common forces" is a rewarding small block: across the 4 real papers we counted, 188 questions in total, this knowledge point accounts for 16 questions, and all 4 papers touch on it. In other words, whichever session you sit, your chances of meeting elastic force, gravity or friction are high.

These 16 questions fall into three parts: 5 on elastic force and Hooke's law, 5 on the magnitude and direction of gravity, and 6 on static and sliding friction. In our count, each question is assigned to only one knowledge point by its main testing point and counted once; this figure only reflects past real papers and is not an official promise about future exams.

The number of questions is small, but all of it is foundational. The force analysis, Newton's laws and work that come later are all built on these three forces. This article explains the three blocks clearly, adds three original worked examples, and ends with the places where marks are most easily lost. For how to plan mechanics as a whole, see How to Revise CSCA Physics Mechanics: 121 of the 188 Questions in 4 Real Papers Are Mechanics.

What you need to know: three formulas, one distinction

Elastic force and Hooke's law

The elastic force of a spring is proportional to the amount of deformation:

F = kx

x is the extension or compression, not the total length of the spring. k is called the stiffness coefficient. Some questions on this site give the stiffness coefficient in N/cm, while some English textbooks use N/m; the conversion is 1 N/cm = 100 N/m.

Gravity: G = mg

Chinese textbooks and the questions on this site use G for gravity, written G = mg; some English textbooks use W for weight, written W = mg, which means the same thing.

In Chinese textbooks g is written as 9.8 N/kg; simplified questions take 10 N/kg and state it in the question stem. Some English textbooks write 9.8 m/s², the same value with only a different unit notation. When you work a question, first check which value the stem gives, then start writing. Calculators are not allowed in CSCA, so questions generally give numbers that are easy to compute.

Static friction and sliding friction

  • Sliding friction: when the object is already sliding relative to the surface, f = μN. μ is the coefficient of kinetic friction and N is the normal force on the contact surface, which is not necessarily equal to gravity.
  • Static friction: when the object is not sliding relative to the surface, you cannot use μN. Static friction must be found from the object's state of motion: when the object is in equilibrium, write the equilibrium equations, and the magnitude of static friction equals the force it balances; when the object has acceleration, write F_net = ma and solve. Static friction changes with the external force and never exceeds the maximum static friction.

Remember it in one sentence: for sliding friction use the formula; for static friction look at the state of motion.

Original worked examples (3 — work them out yourself before reading the solutions)

Example 1 (Hooke's law) A spring has an original length of 10 cm; after a 2 N weight is hung on it, its length becomes 12 cm. Find the stiffness coefficient k; how much more weight must be hung on it for the spring's length to become 15 cm?

Solution: the deformation x₁ = 12 − 10 = 2 cm = 0.02 m. k = F ÷ x₁ = 2 ÷ 0.02 = 100 N/m (that is, 1 N/cm). At a length of 15 cm, x₂ = 15 − 10 = 5 cm = 0.05 m. F = kx₂ = 100 × 0.05 = 5 N, so the total weight of the weights is then 5 N; 2 N is already there, so 3 N more needs to be added. Answer: k = 100 N/m; total weight 5 N, so hang on 3 N more.

Example 2 (Gravity) For an object of mass 2 kg, find its gravity taking g = 10 N/kg and g = 9.8 N/kg respectively.

Solution: G = mg = 2 × 10 = 20 N; G = 2 × 9.8 = 19.6 N. Answer: the two choices give 20 N and 19.6 N respectively. Within one question, use only the g specified in the stem.

Example 3 (Static friction and sliding friction) A wooden crate of mass 5 kg is placed on horizontal ground, the coefficient of kinetic friction is μ = 0.4, and g is taken as 10 N/kg. First a 10 N horizontal force is used to push it, and the crate does not move; then a 25 N horizontal force is used to push it, and the crate slides. Find the friction force on the crate in each case, and the net force in the second case.

Solution: the normal force N = G = mg = 5 × 10 = 50 N. Sliding friction f = μN = 0.4 × 50 = 20 N. First case: 10 N is less than 20 N, the crate does not move and is in equilibrium, so static friction is found from equilibrium: f = 10 N, and the net force is 0. Second case: the crate slides, so the friction is sliding friction, f = 20 N; the push is 25 N, so the net force = 25 − 20 = 5 N, in the same direction as the push. Answer: at 10 N the static friction is 10 N; at 25 N the friction is 20 N and the net force is 5 N.

Common mistakes

  • Taking the spring's total length as the deformation. x is always "the current length minus the original length", or "the original length minus the current length", taken as a positive value.
  • Units not unified. If cm is not converted to m and you then compute with a k in N/m, the answer will be off by a factor of 100. When you see N/cm, think 1 N/cm = 100 N/m.
  • Forcing f = μN onto static friction. When there is no relative sliding, friction must be found from the state of motion: in equilibrium write the equilibrium equations, with acceleration write F_net = ma; the magnitude may be less than μN.
  • Assuming N always equals mg. When the object is on an incline, or when other forces act in the vertical direction, the normal force does not equal gravity.
  • Using the wrong g. If the stem says "take g = 10 N/kg", use 10; if it does not say, use 9.8 N/kg. Chinese textbooks write 9.8 N/kg and English textbooks write 9.8 m/s²; do not let the difference between the symbols W and G confuse you.
  • The direction of friction. The direction of sliding friction is opposite to the direction of relative motion, which is not necessarily opposite to the direction of the push.

Revision advice

Below is the study order I suggest; it is not an official requirement, and you can adjust it to your own situation:

  1. Learn gravity first, 5 questions; the formula is the simplest, and you only need to become fluent with G = mg and how g is chosen, while also getting the units of mass and gravity clear.
  2. Then learn elastic force and Hooke's law, 5 questions; the key is to find the deformation correctly and not slip up on unit conversion. When working a question, first draw a line and mark the original length and the current length.
  3. Learn friction last, 6 questions; this part needs the most judgement: first ask "has it moved?", then decide whether to use the equilibrium equations, F_net = ma, or f = μN.
  4. Practise force diagrams with all three forces together: for every question, first draw the object and mark G, N and f, then write the equations. This drawing step blocks most mistakes.

The three blocks total 16 questions, not many, so it is best to learn them in one go and finish with two or three comprehensive questions.

Next steps

If you want to see how well you have mastered these three blocks, take a 15-minute diagnosis; if you want systematic practice by knowledge point, go to the Physics Learning Centre. Mechanics accounts for 121 of the 188 questions in the 4 real papers; for how to divide your time across this bigger picture, see What CSCA Physics Tests: Module Distribution Across 188 Questions in 4 Real Papers.

Further reading

最后核实于 2026 年 11 月 8 日。CSCA·PRO 是独立备考平台,与官方 CSCA 考试及其主办方无关联;考试安排以官方公告为准。

想知道自己哪类题最慢?15 分钟水平测试,交卷马上出报告。
免费测水平
你的情况该怎么考?问问我们由 CSCA·PRO 团队回复