CSCA Chemical Formulas, Valence and Chinese Nomenclature: Clear This Hurdle Before You Choose the Chinese Paper

CSCA chemical formulas, valence and Chinese nomenclature came up in all 4 sets of past papers. This article explains common valences, the Chinese naming rules for "某化某", "某酸某", "亚" and "高", how to write ion symbols and oxidation numbers, and how to tell ionic from covalent bonds, with original pract

CSCA·PRO 编辑部2026 年 11 月 8 日 · 11 分钟阅读
CSCA·PRO

This article covers the small topic of CSCA chemical formulas, valence and Chinese nomenclature. It does not carry many questions, but it appeared in all 4 sets of past papers, and it is the "language" you need to read every chemistry question that follows: if you write formulas incorrectly and name substances inaccurately, you will lose marks on the calculation and experiment questions too.

If you plan to take the chemistry paper in Chinese, you need to clear this hurdle first. On the Chinese paper, ion symbols, substance names and electron-dot formulas are not written exactly the way English textbooks write them. This article explains the rules clearly first, then walks you through them with original practice questions.

How many questions on this in the past papers

Official rules: chemistry is 60 minutes, 48 single-choice questions, full marks 100, averaging 75 seconds per question. You can take chemistry in Chinese or in English; ultimately the requirements of the institution you are applying to decide. For how to choose your subjects, see Which CSCA subjects should you take? Choose by application type, major and language of instruction.

We counted 4 sets of recalled questions compiled by candidates, 185 questions in total. Two knowledge points relate to this article:

  • Chemical formulas, valence and Chinese nomenclature: 7 questions, covered in all 4 sets. Among the sub-items already counted, "identify the name of a chemical formula" was 4 questions and "write an ion symbol" was 1 question; the sub-item count is incomplete, so only the parts already counted are listed here.
  • Ionic bonds, covalent bonds and expressing bonding: 4 questions, covered in all 4 sets. Among the sub-items already counted, "judge the bond type in a substance" was 3 questions.

These two knowledge points total 11 questions, that is 7 plus 4, the total for these two knowledge points only, with no further breakdown. 11 out of 185 is not many, but its "appearance rate" is 4 out of 4 sets. In other words, these two knowledge points appeared in every one of the four counted sets, and these questions are usually not hard — marks you should secure.

One note: the count only reflects past papers, not an official promise about what will be set.

CSCA chemical formulas, valence and Chinese nomenclature: which hurdles to clear first

Broken down, it is a few things: be able to write the formula, be able to say the name, be able to write the symbol correctly, and finally one more — be able to tell the bond type.

First: common valences

First memorise the most common valences (not absolutely fixed; exceptions noted below):

  • Hydrogen +1 (in metal hydrides such as NaH it is −1)
  • Oxygen −2 (in peroxides such as H₂O₂ it is −1)
  • Sodium +1, potassium +1, silver +1
  • Magnesium +2, calcium +2, barium +2, zinc +2
  • Aluminium +3
  • Chlorine −1 (in HClO, hypochlorous acid, it is +1)

Then memorise the ones that "change":

  • Iron +2 and +3
  • Copper +1 and +2
  • Manganese: +6 in K₂MnO₄, potassium manganate, and +7 in KMnO₄, potassium permanganate

Common radicals should be memorised as "one block":

  • Hydroxide OH⁻, −1
  • Nitrate NO₃⁻, −1
  • Sulfate SO₄²⁻, −2
  • Carbonate CO₃²⁻, −2
  • Ammonium NH₄⁺, +1

A suggested approach: memorise the common valences and radicals first, and tackle the variable iron, copper and manganese last. Once the radicals are solid, writing formulas gets much faster.

Second: how to write a chemical formula

When writing common metal oxides and salts, generally put the metal (positive valence) on the left and the non-metal or acid radical (negative valence) on the right; the subscript is found by the "cross method": take the lowest common multiple of the absolute values of the two valences, then divide it by each valence.

This left-right order applies only to this kind of substance; do not apply it to all compounds. For example, in NH₃ the nitrogen, which has the negative valence, is written on the left.

Take aluminium oxide: aluminium +3, oxygen −2. The lowest common multiple of 3 and 2 is 6, so aluminium takes 6 ÷ 3 = 2 and oxygen takes 6 ÷ 2 = 3, giving Al₂O₃. Checking back: (+3) × 2 + (−2) × 3 = 6 − 6 = 0, the algebraic sum of the valences is 0, so it is written correctly.

Third: Chinese naming — 某化某, 某酸某, 亚, 高

  • 某化某 ("X-ide of Y"): most common binary compounds use this naming. NaCl is 氯化钠 (sodium chloride), MgO is 氧化镁 (magnesium oxide), CaCl₂ is 氯化钙 (calcium chloride), Al₂O₃ is 氧化铝 (aluminium oxide). Ammonium salts and the like also use this form, e.g. NH₄Cl is 氯化铵 (ammonium chloride) — it contains three elements yet is still named "某化某".
  • 某酸某 ("X-ate of Y"): contains an acid radical. K₂SO₄ is 硫酸钾 (potassium sulfate), CaCO₃ is 碳酸钙 (calcium carbonate), NaNO₃ is 硝酸钠 (sodium nitrate). Bases containing hydroxide are named "氢氧化某", e.g. NaOH is 氢氧化钠 (sodium hydroxide).
  • 亚: when the same metal has two valences, the lower one takes "亚". FeCl₂ is 氯化亚铁 (iron(II) chloride, iron +2), FeCl₃ is 氯化铁 (iron(III) chloride, iron +3); CuCl is 氯化亚铜 (copper(I) chloride, copper +1), CuCl₂ is 氯化铜 (copper(II) chloride, copper +2).
  • 高: not every high valence takes "高"; it depends on the specific name, so learn them by example. For manganese: in KMnO₄ manganese is +7 and the name is 高锰酸钾 (potassium permanganate); in K₂MnO₄ manganese is +6 and the name is 锰酸钾 (potassium manganate). Iron is different: in FeCl₃ iron is +3 and the name is 氯化铁 (iron(III) chloride), with no "高".
  • 酸: H₂SO₄ is 硫酸 (sulfuric acid), H₂SO₃ is 亚硫酸 (sulfurous acid), HNO₃ is 硝酸 (nitric acid), H₂CO₃ is 碳酸 (carbonic acid).

Here is a trap where the Chinese and English orders are reversed: Chinese naming puts the anion or acid radical first and the metal after, so KCl is 氯化钾; some English textbooks write it with the cation first as potassium chloride. If you are coming from English textbooks, you can easily read the order backwards when reading questions; when you see a Chinese name you need to be able to "flip it back" in your head.

Fourth: do not mix up ion symbols and oxidation numbers

Chinese textbooks and the questions on this site write the ion charge at the upper right of the element symbol, number first and sign after, with 1 omitted: Mg²⁺, SO₄²⁻. Some English textbooks write Mg2+ or Mg+2.

Oxidation numbers are written as +2, −2, with the sign first, and in a different position. Some English textbooks use Roman numerals for valence, such as iron(II).

In one sentence: ion charge goes at the upper right, number first (Mg²⁺); oxidation number is written with the sign first (+2).

How to judge ionic and covalent bonds

Here is a suggested order of judgement — not an official rule, but it works well on questions:

  1. Look at the composition. Between a metal (or ammonium radical) and an acid radical or non-metal, it is generally an ionic bond, e.g. NaCl, MgO, Na₂SO₄.
  2. Between two non-metal elements, it is generally a covalent bond, e.g. HCl, CO₂, H₂O.
  3. Some substances have both kinds of bond: in NaOH there is an ionic bond between Na⁺ and OH⁻, and a covalent bond between O and H.

How to write the electron-dot formula: Chinese textbooks and the explanations on this site use "·" or "×" to show the outermost electrons; the two symbols only serve to distinguish where the electrons come from. Some English textbooks use only dots. When you write, as long as you are consistent and it is clear which electron came from which atom, that is enough.

Original practice questions

The questions below are all original, not past papers.

Original question 1: Write the chemical formulas of aluminium oxide and aluminium sulfate.

Solution: Aluminium oxide — aluminium +3, oxygen −2, lowest common multiple 6, Al takes 2 and O takes 3, giving Al₂O₃. Check: (+3) × 2 + (−2) × 3 = 0.

Aluminium sulfate — aluminium +3, sulfate radical −2, lowest common multiple 6, Al takes 2 and SO₄ takes 3, giving Al₂(SO₄)₃. Check: (+3) × 2 + (−2) × 3 = 0. Note that brackets are needed when there is more than one acid radical.

Original question 2: Name FeCl₂, FeCl₃ and KMnO₄, and state the valence of the central element in each.

Solution: Chlorine is −1, so in FeCl₂ iron is +2 and the name is 氯化亚铁 (iron(II) chloride); in FeCl₃ iron is +3 and the name is 氯化铁 (iron(III) chloride). The lower valence takes "亚", so it is "亚铁" and not "铁".

In KMnO₄, potassium is +1 and oxygen is −2 with 4 oxygen atoms, so oxygen totals −8. Let manganese be x: +1 + x + (−8) = 0, giving x = +7. Manganese is +7, and this name uses "高", so it is 高锰酸钾 (potassium permanganate).

Original question 3: How do you write the symbol for the magnesium ion? How do you write the valence of magnesium in MgO?

Solution: The magnesium ion is Mg²⁺ — written at the upper right, the number 2 first and the plus sign after. In MgO oxygen is −2, so magnesium is +2, written +2 — sign first. The two answers look similar, but the position and the order are completely different; do not mix them up.

Original question 4: Judge which kind of chemical bond is mainly present in NaCl, HCl and NaOH.

Solution: NaCl is made of the metal sodium and the non-metal chlorine, so it is an ionic bond. HCl is made of two non-metal elements, so it is a covalent bond. NaOH has both: between Na⁺ and OH⁻ it is an ionic bond, and between O and H it is a covalent bond.

Common mistakes

  • Writing the ion charge as "Mg+2" or "Mg2+" when it should be Mg²⁺ on the Chinese paper.
  • Writing the oxidation number as "2+" when it should be +2.
  • Forgetting the brackets when there is more than one acid radical and writing Al₂SO₄₃.
  • Calling FeCl₃ "氯化亚铁" when +3 does not take "亚".
  • Assuming "a high valence always takes 高" and calling FeCl₃ "高氯化铁". Learn the names by the specific name; do not work them out yourself.
  • Remembering the ammonium radical NH₄⁺ as −1. It is +1, so (NH₄)₂SO₄ needs two ammonium radicals.
  • Judging the bond type only by "is there a non-metal", forgetting substances such as NaOH and Na₂SO₄ that have both kinds of bond.
  • Having read too many English textbooks and saying potassium chloride straight in that order as "钾氯化", when the Chinese convention is "氯化钾".

Revision advice

The following are suggestions for study, not official rules; adjust them to your own situation:

  1. Spend the first two days memorising the common valences and the five common radicals until you can write them from memory.
  2. Make a small Chinese-English card: Mg²⁺, SO₄²⁻ on the left and the English textbook way of writing on the right, and look at it once a day.
  3. Set your own questions: write 20 chemical formulas at random and name them one by one; or write 20 Chinese names and work back to the formulas. Copy out the ones you get wrong on a separate line.
  4. For bond-type judgement use the three-step order above, and find 5 examples of each type; that is more useful than memorising definitions.
  5. Practise against the clock. The average is 75 seconds per question; for this kind of question aim to finish within 30 seconds and leave the time for calculation questions.

For where this chapter sits in the whole paper, you can plan the order with What does CSCA chemistry test? 9 blocks from 185 questions in 4 past papers; it works better studied together with ionic reactions, see CSCA chemistry atomic structure and ionic reactions: the two blocks with 5 to 8 questions in every set.

Next step

First take a 15-minute diagnosis to see where you are actually stuck on chemical formulas, valence and bond types; then go to the chemistry learning centre to practise by knowledge point and put today's rules to use.

Further reading

最后核实于 2026 年 11 月 8 日。CSCA·PRO 是独立备考平台,与官方 CSCA 考试及其主办方无关联;考试安排以官方公告为准。

想知道自己哪类题最慢?15 分钟水平测试,交卷马上出报告。
免费测水平
你的情况该怎么考?问问我们由 CSCA·PRO 团队回复