CSCA Chemistry Periodic Table: Locating the Period and Main Group, and Judging Trends

In CSCA chemistry, "elements and their position in the periodic table" and "the periodic law and inference between position, structure and properties" have 6 questions each, and all 4 past papers cover them. This article explains how to write the electron shell structure from the atomic number and l

Rédaction CSCA·PRO8 novembre 2026 · 10 min de lecture
CSCA·PRO

The periodic table is like a map of chemistry. When you work on property questions and reaction questions, the first step is often to find where the element sits in the table. In CSCA chemistry, the periodic table section does not have many questions, but it appears very consistently: in the 185 questions across the 4 past papers we counted, the two knowledge points "elements and their position in the periodic table" and "the periodic law and inference between position, structure and properties" each had 6 questions, and all 4 of the 4 papers tested them.

This article covers three things: writing the electron shell structure from the atomic number and locating the period and main group; judging the direction of trends in atomic radius, metallic character and non-metallic character; and finally three self-written example questions plus a list of common pitfalls. Why is it worth learning first? Because there are few rules and the steps are fixed — after a few rounds of practice you can score reliably, and it is the foundation for later study of the properties of substances and ionic reactions. The whole chemistry paper lasts 60 minutes and has 48 single-choice questions worth 100 points in total, which averages 75 seconds per question, so this type of question should not eat up time.

How much is tested here: 6 questions for each of the two knowledge points

First, the weight. The two knowledge points below both belong to the "basic concepts and basic theory" chapter:

  • Elements and their position in the periodic table: 6 questions, covered in 4 of the 4 papers. The sub-item counted so far is "locating the period and main group", also 6 questions.
  • The periodic law and inference between position, structure and properties: 6 questions, covered in 4 of the 4 papers. The sub-items counted so far are 3 questions on "judging the direction of trends" and 1 question on "converting between structure and position". The sub-items are incomplete, so do not add them together, and do not use them to work out how many questions the remaining sub-items have.

The two knowledge points add up to 12 questions (6 + 6) in total, which is the combined total for these two knowledge points. Note: the figures above only reflect past papers; they are not an official promise about future papers. For the overall picture of the 9 sections of the chemistry paper, see What CSCA Chemistry Tests: The 9 Sections of 185 Questions Across 4 Past Papers.

CSCA chemistry periodic table: locating the period and main group from the atomic number

The steps are below. Follow them in order and do not skip any.

Step 1: Turn the atomic number into an electron shell structure

For a neutral atom: atomic number = nuclear charge number = proton number = number of extranuclear electrons. For the first 20 elements, you can fill up to 2, 8 and 8 electrons into the first, second and third shells in turn, then put the remaining electrons into the fourth shell; beyond element 20, you have to judge from the actual electron configuration.

Chinese textbooks and this site's questions write the number of electrons in each shell joined by the Chinese enumeration comma, for example "electron shell structure 2、8"; some English textbooks write "2, 8" or "2-8". In an atomic structure diagram, the centre of the circle shows "+16" for the nuclear charge number, while some English textbooks write "16+" or "16 p", with the symbol after the number. For this basic skill, see the more detailed explanation in CSCA Chemistry Atomic Structure and Ion Reactions.

It is best to practise only elements 1 to 20 first: their electron shell structures are the most regular, and once you are fluent you can extend outwards.

Step 2: The period comes from the number of shells, the main group from the number of outermost electrons

  • Period number = number of electron shells. 3 shells means period 3.
  • Main group number = number of outermost electrons (this holds only for main group elements). 1 outermost electron means group ⅠA, 7 means group ⅦA.
  • Elements whose outermost shell reaches a stable structure are in group 0 (the noble gases). Helium has 2 outermost electrons and is also placed in group 0.

Watch the notation: Chinese textbooks and this site's questions use Roman numerals plus A for main groups, such as "group ⅥA" and "group ⅦA"; some English textbooks simply write group 16, group 17, and write group 18 for the noble gases.

You also need the reverse direction: given the position, find the atomic number. For example, "period 3, group ⅦA" means 3 shells with 7 outermost electrons, so the electron shell structure is 2, 8, 7 and the atomic number is 2 + 8 + 7 = 17.

Trends: atomic radius, metallic character, non-metallic character

There are only two main lines. Remember "look at which shell, look at the nuclear charge number" and you will not get confused.

Across a period, from left to right: the number of electron shells stays the same, the nuclear charge number increases in turn, and the nucleus attracts the outermost electrons more strongly. The result is:

  • the atomic radius gradually decreases;
  • the ability to lose electrons weakens and the ability to gain electrons strengthens;
  • metallic character weakens and non-metallic character strengthens.

Down a main group, from top to bottom: the number of electron shells increases and the atomic radius grows. The result is:

  • the atomic radius gradually increases;
  • the ability to lose electrons strengthens and the ability to gain electrons weakens;
  • metallic character strengthens and non-metallic character weakens.

Two extra tips. First, atomic radius has a unit: Chinese textbooks and this site's questions write "99 pm", while some English textbooks use the ångström (Å) or the nanometre (nm), such as 0.99 Å or 0.099 nm; the relative atomic mass below the element's box is a ratio and carries no unit. Second, when judging the category, Chinese textbooks often use character radicals as a hint: the 钅 radical usually means a metal, while the 气 (gas) top and the 石 (stone) and 氵 (water) left radicals usually mean a non-metal; some English textbooks only give the English name and the element symbol with no such clue, so you judge by position instead.

Self-written example questions (all examples below are self-written)

Example 1 (locating from the atomic number) An element has atomic number 16. Write its electron shell structure and determine its position in the periodic table.

Answer: 16 electrons are arranged as 2, 8, 6, so the electron shell structure is 2, 8, 6. There are 3 electron shells, so it is in period 3; there are 6 outermost electrons, so it is in group ⅥA. The element is sulfur.

Example 2 (trends across a period) Compare the atomic radius and the strength of metallic character of the elements with atomic numbers 11, 12 and 13.

Answer: their electron shell structures are 2, 8, 1; 2, 8, 2; and 2, 8, 3 respectively. All three have 3 electron shells and belong to the same period. From left to right the nuclear charge number rises from 11 to 13, and the nucleus attracts the outermost electrons more strongly, so the atomic radius decreases in turn: r(element 11) > r(element 12) > r(element 13). The numbers of outermost electrons are 1, 2 and 3, so the ability to lose electrons weakens in turn, and therefore metallic character weakens in turn: element 11 > element 12 > element 13 (that is, Na > Mg > Al).

Example 3 (finding the atomic number from the position + trends down a main group) (1) An element is in period 3, group ⅦA. Find its atomic number and electron shell structure. (2) Compare the strength of non-metallic character of the elements with atomic numbers 9, 17 and 35.

Answer: (1) Period 3 means 3 electron shells, and group ⅦA means 7 outermost electrons, so the electron shell structure is 2, 8, 7; atomic number = 2 + 8 + 7 = 17. (2) All three elements have 7 outermost electrons and belong to the same main group, with 2, 3 and 4 electron shells respectively. From top to bottom the atomic radius increases and the ability to gain electrons weakens, so non-metallic character weakens in turn: element 9 > element 17 > element 35 (that is, F > Cl > Br).

List of common pitfalls

  • The period depends on the number of shells, not the number of outermost electrons. These two numbers are often swapped, and one swap makes everything wrong.
  • Main group number = number of outermost electrons applies only to main group elements. Do not apply this rule to transition elements.
  • The noble gases are group 0, not "group ⅧA". English textbooks write group 18, which means the same group.
  • Before comparing radii, ask one question: same period or same main group? For two elements in different periods and different main groups, you cannot simply force one rule onto them.
  • Write the electron shell structure with the enumeration comma, such as 2、8、6, and do not switch between commas and enumeration commas. In the structure diagram the centre of the circle shows "+16", not "16+".
  • Do not drop the unit and do not add one at random: atomic radius is written as 99 pm, while relative atomic mass carries no unit.
  • For the set of 10-electron ions Na⁺, Mg²⁺ and Al³⁺, which have the same electron shell structure, the larger the nuclear charge number, the smaller the radius, so the radius order is Na⁺ > Mg²⁺ > Al³⁺. Note that "same electron shell structure" does not mean there must be 10 electrons; there are also 18-electron ions.
  • CSCA does not allow calculators. Fortunately the addition in this section is all whole-number mental arithmetic, so do not reach for a calculator when you practise.

Revision suggestions (the following are writing suggestions, not official rules)

  1. First memorise the atomic numbers, element symbols and electron shell structures of elements 1 to 20, so that you can write them out as soon as you see the atomic number.
  2. Practise ten sets in both directions: five sets from atomic number to position, five sets from position to atomic number. After each set, check the number of shells and the number of outermost electrons yourself.
  3. Draw a small table: write a period as a row and a main group as a column, and use arrows to mark the direction of change in radius, metallic character and non-metallic character. One look before the exam is enough.
  4. Check yourself with questions: after practising the knowledge point, find the matching questions in practice and write down "how many steps led to the answer" for each one, rather than just checking the answer.

Next steps

If you want to know where you stand in chemistry first, take a 15-minute diagnosis; if you want to study systematically by knowledge point, go to the chemistry learning centre.

Further reading

Dernière vérification le 8 novembre 2026. CSCA·PRO est une plateforme de préparation indépendante, sans lien avec l’examen CSCA officiel ni ses organisateurs ; le calendrier des examens suit les annonces officielles.

Vous voulez savoir quels types de questions vous ralentissent ?Un test de niveau de 15 minutes, avec un rapport dès la remise de votre copie.
Test de niveau gratuit
Qu'est-ce que ça change pour vous ? Demandez-nousL'équipe CSCA·PRO vous répond