CSCA Math Logarithm Questions: How to Evaluate and Compare Without a Calculator

In CSCA Math, "logarithms and logarithmic functions" appear 16 times across 7 past papers, including 8 on evaluating logarithmic expressions and 7 on comparing logarithms. This article explains the laws of logarithms, the change-of-base formula and the benchmark method of comparing with 0 and 1, wit

Ban biên tập CSCA·PRO8 tháng 11, 2026 · 10 phút đọc
CSCA·PRO

This article is about one type of question in CSCA Math: logarithms. There are two ways it is asked. The first gives you a logarithmic expression and asks you to evaluate it; the second gives you several logarithms and asks you to compare their sizes. Neither type requires an exact decimal — you can finish them by rewriting, fitting the numbers into known values and reasoning. That point is crucial, because the exam does not allow calculators.

First the exam rules, so you can see why it is worth practising. CSCA Math lasts 60 minutes and has 48 single-choice questions with a full score of 100, averaging about 75 seconds per question. Both the rules for the centralised computer-based test and the integrity pledge state clearly: calculators may not be brought in or used. There are no buttons to press in the exam hall — only hand calculation and mental arithmetic. Logarithm questions happen to be the kind where "get the formula right and you can compute it", so once you are fluent they are steady marks.

How many logarithm questions CSCA Math actually tests

We counted 7 past math papers, 333 questions in total, with each question assigned to exactly one knowledge point according to its main tested concept. "Logarithms and logarithmic functions" sits in the functions module, with 16 questions in total, and every one of the 7 papers touches it. Its sub-items are:

  • Evaluating logarithmic expressions: 8 questions
  • Comparing logarithms: 7 questions
  • Properties of logarithmic functions: 1 question

In other words, the two types this article focuses on, evaluation and comparison, come to 15 questions together — the great majority of the 16.

In addition, "exponential functions" account for 3 questions, touched by 3 of the 7 papers, and all the sub-items counted so far are "determining properties of a function". Exponentials are the foundation of logarithms, so it is worth studying these two knowledge points together. Add the question counts of the two: 16 + 3 = 19 questions.

The counts only reflect past papers, not an official promise about future exams. But they show at least one thing: this knowledge point appears in every paper and cannot be skipped.

What you need to know: definition, laws, change of base

Definition: In log_a N, a is the base and N is the argument (some English textbooks call N only the argument). The requirements are a > 0 and a ≠ 1, and N > 0. These three restrictions are the premise of every question below.

Special values: log_a 1 = 0, log_a a = 1, log_a(1/a) = −1. The first two are the "benchmarks" used most often when comparing sizes.

Three laws (all require M > 0 and N > 0):

  • log_a(MN) = log_a M + log_a N
  • log_a(M/N) = log_a M − log_a N
  • log_a(M^n) = n·log_a M

Change of base: log_a b = log_c b / log_c a. Two common corollaries: log_a b · log_b a = 1; log_a b · log_b c = log_a c (the bases link end to end and can be "cancelled").

Notation: Chinese textbooks write base-10 logarithms as lg N; some English textbooks treat log N with no base written as base 10, that is, log₁₀ N. ln N is base e. Confirm the base when you read the question — misread this step and everything after it is wrong.

Properties of exponential functions: y = a^x is increasing when a > 1 and decreasing when 0 < a < 1; the range is (0, +∞), and the graph always passes through the point (0, 1). Chinese textbooks use round brackets for open intervals; some textbooks write ]0, +∞[, which means the same thing.

Properties of logarithmic functions: y = log_a x is the inverse function of the exponential function, its domain is (0, +∞), its graph always passes through the point (1, 0), and its monotonicity matches that of the exponential function with the same base. Chinese textbooks write D_f for the domain; some English textbooks simply write domain.

Estimating: to judge between which two integers a logarithm lies without a calculator, sandwich the argument between two powers of the same base. For example log₂5: because 2² = 4 < 5 < 8 = 2³, we get 2 < log₂5 < 3. This move is used often when comparing sizes.

Comparing logarithms: use 0 and 1 as benchmarks

Comparison questions do not need exact values, only an ordering. Follow this fixed order:

  1. Compare with 0 first: when the argument is greater than 1, a base greater than 1 gives a positive value, and a base between 0 and 1 gives a negative value.
  2. Then compare with 1: use log_a a = 1. When the base is greater than 1, an argument greater than a means the value is greater than 1; when the base is between 0 and 1, the conclusion is reversed.
  3. If that still isn't enough, find a benchmark: commonly 1/2, −1, or convert to the same base and compare. With the same argument and different bases, look at the argument first: if the argument is greater than 1 and both bases lie in (0, 1) or both in (1, +∞), then the larger the base, the smaller the logarithm; when the argument is between 0 and 1, the conclusion is the opposite. Note that this rule cannot be used across 1: for example log₀.₅2 = −1, while log₂2 = 1 — the base 0.5 is smaller than 2, yet the value is smaller too.

The benefit of the three-step approach is that every question has a fixed set of actions, so you don't have to improvise a plan in the exam hall.

Original worked examples

The examples below are all my own, not past exam questions; the numbers are deliberately chosen to be hand-computable.

Example 1: subtract same-base logs, then make a 1

Compute log₂6 − log₂3 + lg5 + lg2.

Solution: for the first part use the quotient law: log₂6 − log₂3 = log₂(6/3) = log₂2 = 1. For the second part use the product law: lg5 + lg2 = lg(5 × 2) = lg10 = 1. The original expression = 1 + 1 = 2.

Remember this handy result: lg2 + lg5 = 1. Many evaluation questions finish on it.

Example 2: change of base, bases linking end to end

Compute log₂5 · log₅8.

Solution: convert log₅8 to base 2: log₅8 = log₂8 / log₂5 = 3 / log₂5. Substitute back: log₂5 × 3 / log₂5 = 3.

You can also use the corollary directly, log_a b · log_b c = log_a c: log₂5 · log₅8 = log₂8 = 3. Both routes give the same result; the corollary is faster in the exam.

Example 3: compare three numbers

Compare a = log₂3, b = log₃2 and c = log₀.₅3.

Solution: compare a with 1: log₂3 > log₂2 = 1, so a > 1. b is sandwiched between 0 and 1: 0 = log₃1 < log₃2 < log₃3 = 1. c has base 0.5, which is less than 1, so the function is decreasing, and 3 > 1, so log₀.₅3 < log₀.₅1 = 0 — c is negative. Conclusion: a > b > c.

Example 4: a comparison containing the base (easy to miss a case)

If log_a 2 < 1, find the range of values of a.

Solution: write 1 as log_a a, and the inequality becomes log_a 2 < log_a a. The size of the base affects monotonicity, so you must split into two cases:

  • When a > 1, the function is increasing, and log_a2 < log_a a gives 2 < a, that is, a > 2.
  • When 0 < a < 1, the function is decreasing, giving 2 > a. This condition holds throughout 0 < a < 1, so this whole stretch qualifies.

Together: a ∈ (0, 1) ∪ (2, +∞). Writing it as ]0, 1[ ∪ ]2, +∞[ gives the same set.

Example 5: rewrite using lg2 + lg5 = 1

Compute (lg2)² + lg2 · lg5 + lg5.

Solution: factor lg2 out of the first two terms: lg2(lg2 + lg5) = lg2 × 1 = lg2. Then add the final lg5: lg2 + lg5 = 1. The answer is 1.

Example 6: solve an inequality using monotonicity

Solve the inequality lg(x − 1) < 1.

Solution: first write that the argument is greater than 0: x − 1 > 0, that is, x > 1. Then write 1 as lg10, so the inequality becomes lg(x − 1) < lg10. The base-10 logarithm is increasing, so x − 1 < 10, that is, x < 11. Intersect the two parts: 1 < x < 11.

If the base in this question were a number between 0 and 1 (say log₀.₅), the inequality sign would have to be reversed — this is the easiest place to lose marks.

Common mistakes

  • Forgetting that the argument must be greater than 0. When finding a domain, first write argument > 0 and base > 0 with base ≠ 1, then work it out. For example, the domain of f(x) = log₂(x − 1) is x > 1.
  • Assuming the base is greater than 1. In questions like Example 4, missing the 0 < a < 1 branch leaves you with only half the answer.
  • Splitting laws carelessly. log_a(MN) = log_a M + log_a N requires both M and N to be greater than 0. log₂[(−2)×(−3)] cannot be split into log₂(−2) + log₂(−3), because the last two terms are themselves meaningless.
  • Writing a product as a sum. log_a M + log_a N is not equal to log_a(M + N); the two sides are generally unequal.
  • Misreading the base and the notation. On Chinese papers lg N is base 10 and ln N is base e; on English papers log N with no base written usually means base 10.
  • Sandwiching between the wrong powers when estimating. To bound log₂5 you sandwich between 4 and 8, not 2 and 4. Before writing, list the powers of 2: 2, 4, 8, 16.
  • Relying on a calculator. Do the arithmetic by hand in everyday practice too, nudging numbers towards powers of 2 and powers of 10, so that you won't panic in the exam hall.

Revision advice (study advice, not official rules)

  1. Spend half a day going over exponential functions first: graph, monotonicity, range (0, +∞). Once exponentials are clear, logarithms are their inverse operation and much easier to learn.
  2. Memorise the three laws, the change-of-base formula and the two special values (log_a1 = 0, log_aa = 1), plus lg2 + lg5 = 1.
  3. Do evaluation questions in sets of 10 to 15, focusing on the two ideas "match the same base" and "make a 1".
  4. For comparison questions, write the steps in the order "compare with 0 first, then with 1, then find a benchmark" — don't go by feel.
  5. Practise under a time limit, keeping each question to about 75 seconds; if you overrun, mark it and skip, then come back to it. In everyday practice you can drill by knowledge point on the practice page.
  6. After each set, sort your mistakes by cause: a misremembered formula, a misread base, or a missed argument > 0. Sorting is more useful than copying out the answers.

Next steps

If you want to know your current level on logarithms first, take a 15-minute diagnosis; if you want to study systematically by knowledge point, go to the Math Learning Centre, then come back and drill to consolidate.

Further reading

Xác minh lần cuối vào 8 tháng 11, 2026. CSCA·PRO là nền tảng ôn thi độc lập, không liên kết với kỳ thi CSCA chính thức hay ban tổ chức kỳ thi; việc tổ chức kỳ thi căn cứ vào thông báo chính thức.

Bạn muốn biết mình chậm nhất ở dạng câu nào?Bài kiểm tra trình độ 15 phút, nộp bài là có báo cáo ngay.
Kiểm tra trình độ miễn phí
Điều này nghĩa là gì với bạn? Hỏi chúng tôiĐội ngũ CSCA·PRO trả lời